Hammond XK-1c User Manual

*#1 :-%
Owner’s Manual
104
USING AN EXTERNAL SEQUENCER
 is is to record/playback the performance by connecting an external sequencer or
computer to this keyboard.
1. Connect as illustrated.
2. Call the MIDI template “Basic”. (P. 108)
3. Start playing on the Sequencer/DAW.
Recording a organ performance to an Sequencer/DAW
1. Connect as illustrated above.
2. Call the others than the “Use Ex.” (“Basic”, “Two Manual”, “Pedal KBD”, or
“3KBD” depending on your hooked up) of MIDI template (P. 108)
 is hookup is only for recording/playing the XK-1C by itself, not External Zones.*1.
3. Set the MIDI channel of the Sequencer/DAW.
If only using UPPER, set Sequencer/DAW to record channel 1. If using all three
parts, Allow 3 channels in your sequencer/DAW for recording. Channel 1 for UP-
PER, Channel 2 for LOWER, Channel 3 for PEDAL.
4. Start recording on the Sequencer/DAW.
5. If necessary, send the memory dump.
6. Start playing.
Sequencer playback
MIDI Keyboard
MIDI Pedalboard
MIDI OUT
INOUT
(MERGE)
Optional
MIDI IN
MIDI Keyboard
MIDI Pedalboard
MIDI OUT
INOUT
(MERGE)
Optional
MIDI OUT
*1 To record the control of External Zones, addition of
above illustration, connect MIDI IN of controlled
MIDI equipment to MIDI OUT of external se-
quencer, and set Echo ON the external sequencer.
When the playback, connect the MIDI OUT of
external sequencer to MIDI IN of controlled MIDI
equipment instead of this keyboard.

Hammond XK-1c Specifications

General

Brand	Hammond
Model	XK-1c
Category	Electronic Keyboard
Language	English