Hammond XK-1c User Manual

113
Save the Setup
USB
FLASH DRIVE
INITIALIZE THE USB FLASH DRIVE
A “fresh”  e USB fl ash drive must be “initialized”.  e initializing procedure is as follows:
 When initializing is completed, all the contents of the USB  ash drive are erased.
Insert the USB fl ash drive to the USB FLASH DRIVE jack.
Wait until the display “Confirming USB. Please
wait...” disappears.
Press the [MENU/EXIT] button to display the Menu.
Select Page D with the [S],[T] buttons.
Press the [ENTER] button.
 e FORMAT (=initializing) mode is displayed.
Press the [ENTER] button.
Confi rmation message is displayed.
Press the [ENTER] button.
Initialization starts. It takes about 3 seconds.
NOTE: If you choose to not initialize, just press the [MENU/EXIT] but-
ton.
To return to the play mode, press the [PLAY] button.
Select the “ FORMAT” with the [X] button.
RECORD
ENTER
VA L U E
EXIT
MENU /
5
231
64
7 8 MANUAL
RECORD
ENTER
VA L U E
EXIT
MENU /
5
231
64
7 8 MANUAL
RECORD
ENTER
VA L U E
EXIT
MENU /
5
231
64
7 8 MANUAL
RECORD
ENTER
VA L U E
EXIT
MENU /
5
231
64
7 8 MANUAL
RECORD
ENTER
VA L U E
EXIT
MENU /
5
231
64
7 8 MANUAL
RECORD
ENTER
VA L U E
EXIT
MENU /
5
231
64
7 8 MANUAL
1
2
3
5
6
7
8
4

Hammond XK-1c Specifications

General

Brand	Hammond
Model	XK-1c
Category	Electronic Keyboard
Language	English