27
Getting Ready To Play
TRY CREATING YOUR OWN SOUND
In this section you’ll learn how to create your own sound. In this example, a Classic Jazz
Organ.
SELECT [ MANUAL]
First, select the [MANUAL] button (LED lit).
e [MANUAL] button makes all the current control panel
settings active, allowing for real-time registration, and the cre-
ation of new patches.
NOTE: To return to the previous Patch, press the [MANUAL] button
again (LED o ).
Column: INITIALIZE THE INTERNAL SETTINGS [MANUAL]
When the MANUAL button is pressed, not only do the cur-
rent panel settings become active, but the internal settings do
as well. is is the procedure to return them to the DEFAULT
Status.
GO TO THE MENU MODE
Select the [MENU/EXIT] button. e Menu mode appears.
If the display is diff erent from the above illustration, select the
[MENU/EXIT] button again.
LOCATE PAGE D, CHOOSE DEFAULT
Press the [S] button 4 times reaching Page D. e ZONE en-
try is blinking.
Press the [X] button twice. e DEFAULT entry is blinking.
ENTER
Press the [ENTER] button. is brings up the
MANUAL page of the DEFAULT function
mode.
ENTER AGAIN
Press the [ENTER] button. e contents of
MANUAL are initialized.
RETURN TO THE PLAY MODE
Press the [PLAY] button. is returns the
XK-1C to the Play mode.
5
64
7 8 MANUAL
RECORD
ENTER
VA L U E
EXIT
MENU /
5
231
64
7 8 MANUAL
RECORD
ENTER
VA L U E
EXIT
MENU /
5
231
64
7 8 MANUAL
RECORD
ENTER
VA L U E
EXIT
MENU /
RECORD
ENTER
VA L U E
EXIT
MENU /
RECORD
ENTER
VA L U E
EXIT
MENU /
1
2
3
4
5
To Next Page
Loading...
Need help?
General
