To Next Page
J
James WardAug 19, 2025
How to fix a malfunctioning controller on Handicare Mobility Aid?
- WWendy SchultzAug 19, 2025
If your Handicare Mobility Aid controller is malfunctioning, the suggested solution is to replace it.
How to fix a malfunctioning controller on Handicare Mobility Aid?
If your Handicare Mobility Aid controller is malfunctioning, the suggested solution is to replace it.
What to do if there is a short circuit in the motor of Handicare Mobility Aid?
If there is a short circuit in the motor of your Handicare Mobility Aid, check the motor cables or replace the motor.
How to fix a short circuit in Handicare Scooter motor?
If there's a short circuit in the motor of your Handicare Scooter, check the motor cables. If necessary, replace the motor.
What to do if Handicare Trophy has a poor connection to the motor?
If your Handicare Scooter has a bad connection to the motor, check all connections between the controller and the motor.
How to fix Handicare Trophy Scooter controller malfunctioning?
If the controller in your Handicare Scooter is malfunctioning, the suggested solution is to replace it.
What to do if Handicare Trophy controller security found a problem?
If the Controller security on your Handicare Scooter has identified a problem, switch off the scooter. Check all connectors and the condition of the batteries. If the LED bar continues flashing after switching the scooter back on, consult the manufacturer.
What to do if the neutral handle is in neutral position on Handicare Mobility Aid?
If the neutral handle of your Handicare Mobility Aid is in the neutral position, it may be due to a brake malfunction. First, ensure the neutral handle is in the drive position. If the issue persists, check the connections between the brake and the controller. If necessary, replace the brake.
What to do if the throttle was held in during start up of Handicare Mobility Aid?
If the throttle was held in during start up of your Handicare Mobility Aid, which may be due to a speed potentiometer fault, try restarting the scooter without pressing the throttle. If the problem continues, check or replace the speed potentiometer.
What to do if Handicare Mobility Aid batteries require charging?
If the batteries of your Handicare Mobility Aid require charging or there is a poor connection to them, check all connections between the controllers and the batteries. If the connections are OK, try recharging the batteries.
What to do if Egis security finds a problem with Handicare Mobility Aid?
If the Egis security system on your Handicare Mobility Aid has detected a problem, switch off the scooter. Check all connectors and the condition of the batteries. If the LED bar continues flashing after switching the scooter back on, consult the manufacturer.
General| Ground Clearance | 3.5 inches |
|---|---|
| Turning Radius | 59 inches |
| Maximum User Weight | 300 lbs |
| Total Weight | 109 kg |
| Weight Capacity | 300 lbs |
| Weight | 109 kg |
