Handicare Trophy - Liability; Used scooters and the environment

Tools | 9Tools | 9Trophy
3 Tools
3.1 Tools
The tools below are needed for various mechanical settings and maintenance:
Quantity Description Size (mm)
1 Screwdriver, medium 5
1 Screwdriver, crosshead -
1 Hammer (plastic) -
1 Chaser -
1 Circlip pliers -
1 Ring spanner 7 / 10 / 11 / 13 / 17
1 Torque wrench -
1 Socket 7 / 8 / 10 / 11 / 12 / 13 / 16 / 17
1 Socket bit 6
1 Allen key 3 / 4 / 5 / 6 / 8
1 Loctite 243
1 Shock absorber adjustment key -
Use only high-quality tools for the adjustment(s) described.
Make sure that the hexagon of the spanner is attached securely to the hexagon of the fastening article. This prevents the 'rotation'
of hexagons of fastening articles and spanners that may affect proper adjustment.
The following tools are needed for various electronic settings:
Quantity Description Function
1
PG - pc programmer
B-version
Adaptation of the drive programs and technical settings.
Reading out the fault history
PR0210
1
PG - programmer unit
SPIB handheld
Alternative device for PC. Adaptation of the drive programs
and technical settings.
Reading out the fault history
10237