Service instructions | 63Trophy Service instructions | 63Service instructions | 63
Mount the crutch holder, vertical
Preparation
• Switch off the scooter with the ignition key.
Instructions
The following operations are required to mount the vertical
crutch holder:
Note! Suitable work area required!
• Remove the armrest from the backrest frame.
• Mount the vertical crutch holder and the armrest with two
bolts back on the backrest frame.
Relevant article numbers
• 2537 Crutch holder mounted to chair, vertical
Tools used
• Allen key, 6 mm
1
110948-03-010
1
2
6
2
110948-03-011
1
3
2
6
To Next Page
