24
The report will include all stages information.
Press key to scroll the report pages .
Press Log to store the report.
Press ESC to return to USP main screen.
Notes: The Stage 3 report will include the information about Stage 1 and Stage 2.
If the log space is full enter view logged data mode by pressing RCL key and free log space
by deleting previously stored records.
Press Stage 3 to enter in Stage 3 water analysis.
The USP Stage 3 tutorial is displayed.
Press Continue to enter USP Stage 3 analysis.
The instrument will display the sample pH setting mode.
Use a calibrated pH meter to read the pH value of the sample.
Use / keys to set the value to that displayed on the pH meter.
Press Accept to confirm the pH setting.
The USP Stage 3 report will be displayed.
USP MODE PROCEDURES
To Next Page
Loading...
