4 - System setup
4.98
• Vehicle Offsets
Adjust GPS offsets for the Antenna Tab and the Hitch Tab. For more information, see “Vehicle Offsets” on page 4.72.
• Offsets
For more information, see “Swath Section Offsets” on page 4.73.
• Norac UC5
Adjust AutoTerrain/AutoHeight/AutoSlant settings - see also “SafeTrack/IntelliTrack” on page 4.98. For further
information, please refer to the AutoTerrain/AutoHeight/AutoSlant UC5 instruction books.
SafeTrack/IntelliTrack
For ISOBUS the Implement Modelling can be
selected. This allows display to accurately calculate
path of a sprayer equipped with steering.
Configuration
Select Your Specific
Configuration
Offsets
Implement Offsets: Hardi Commander
Implement
Liquid with Hardi
Implement Modeling
Implement Provides a Rear Hitch
Hitch to Axle
Distance
Lateral Offset from Centerline
Left
Implement Type
Standard
Front Hitch to Rear Hitch
Implement Rear Hitch
Heading
Aggressiveness
Boom Control
To Next Page
Loading...
