5 - Operation
5.26
4. Product application reports are automatically stored on the external data card at the time of report creation. Reports
are created and stored inside folders that are created with the following sequential information provided by the
display:
• Ten-digit serial number of the display. Example: 2007250001.
• Grower
• Farm
• Field Name
• Configuration Name
• Unique ID #
• Date of most recent product application. The files date information is listed according to Year, Month, Day.
Example: East 91_Post Sprayer_DirectLiquid_0000177a_060506.pdf.
Smart Report Auto-Generation
This screen allows the user to change the settings
that affect the creation of application reports.
• Automatically Create Application Report
check box
Check this option to have the display
automatically generate an application report
each perform the action in the Creation
Trigger drop-down menu.
• Creation Trigger drop-down menu
User can select to generate reports upon
Event Change or Event Closed.
If changing products through the field, it is
recommended to set the Prompts to Close
Event check box in Event Options. See “Field
Operation Options” on page 58 for more
information on setting Prompts to Close
Event.
• Export Location
User can select to export the reports to a USB storage device or AgFiniti. This prevents accidentally exporting to the
wrong destination.
Auto-generated reports are stored locally within the display and are manually exported to a connected USB media
device or AgFiniti. User is warned if connected media device doesn’t match the selected export location.
See “Export Reports” on page 4.108 for more information on exporting to USB storage.
Field Notes
Automatically Create
Application Reports
Event Change
USB Storage Device
Copy Notes From Region to Region
Prompt For Field Notes
Creation Trigger
Export Location
Report Map Appearance
Multi-Color Rate
Single Color Coverage
Conditions
Equipment
Product
Memo
Settings
To Next Page
Loading...
Need help?
General
