Hardi HC 8500 - Page 47

4 - System setup
4.21
15. Create Implement by pressing the
button.
16. Implement Information:
A. Press the “Make” to type in the
implement name.
B. Press the “Model” to type in
the implement model.
C. Press to confirm.
17. Attachment Type:
A. Select Implement Attachment Type:
• “Rear Drawbar” for a trailer sprayer.
• “Rear Lift Arms” for a lift sprayer.

ATTENTION! The option “Front Lift Arms” is
not used for HARDI® sprayers.
B. Press to confirm selection.
Operating Configuration Wizard: Implement
Select Implement
Implement Wizard: Make and Model
Enter Implement Information
Make
Model
Hardi
Commander
Implement Wizard: Attachment Type
Implement Attachment Type
Rear Drawbar