Hardi HC 8500 - Page 49

4 - System setup
4.23
21. Press “Device” drop down menu to select
“ISOBUS” for a HARDI® sprayer.
22. Device drop down menu will change to
ISOBUS.
Press to confirm selection.
23. Select Controller Make:
A. Select “Hardi” in the “Make” drop
down menu.
After selection, the “Model” drop
down menu will disappear.
B. Check the “Supports Rate Control” box
to enable the HARDI® VT rate control
function.
C. Press to confirm selection.
Controller Setup Wizard: Device
Select Controller or Flow Meter
Device
Direct Type
DirectCommand
Liquid Product Control
Controller Setup Wizard: Device
Select Controller or Flow Meter
Device
ISOBUS
Controller Setup Wizard: Make and Model
Select Controller Make and Model
Make
Hardi
Supports Rate Control