4 - System setup
4.50
• When you highlight the configuration, the equipment in the configuration are listed in the box on the right side of the
screen.
• Information regarding configurations for specific operations is given in each operations chapter.
• Rename button.
Press to rename the configuration.
• Setup button.
Press to adjust configuration settings.
• Remove button.
Press to remove a configuration.
±
WARNING! When you remove a configuration all data logged with that configuration will also be removed! However,
all log files will remain in memory until exported to the USB drive.
• button.
Press to add, edit, or remove information for a specific vehicle, implement or controller.
Product tab
The Product tab is where you can add, edit or
remove product information.
The Product tab is where you can perform the
following tasks:
• Add or import Planting products.
• Add or import Application products.
• Add Application Product mixes (such as a
tank mix, or a dry blend of multiple products).
• Add or import Harvest products.
Add button.
Press to add or import a Product. At the
following screen, choose a Product Option:
Add Product, Import Product, or Add Product
Mix (if in Application). From here, an on-
screen wizard continues you through each step of the setup process.
• When finished, the new product appears in Product Tab.
• When you highlight the product, information about the product appears on the right side of the screen.
• Specific planting and application product information can be viewed in those respective chapters.
Equipment
Product
Configuration Setup
Configuration Product Equipment
Application
28% UAN
30% UAN
Ag Lime
Manufacturer:
Type:
Units:
Restricted Use:
EPA Number
Fertilizer
gallons
No
To Next Page
Loading...
Need help?
General
