4 - System setup
4.64
Features tab
Unlocking Features
The Features Tab is where you can enter unlock
codes. Unlock codes are unique to the serial
number of each display and the feature
registration number. You must supply these
numbers to your dealer when purchasing any
unlock codes.
Press to enter the unlock code and press
to enable the feature.
÷
NOTE! Once a feature is unlocked, that
feature remains with that display and
cannot be transferred to another.
ATTENTION! Features used with HARDI®
sprayers are always enabled.
Features
General Display Features
Advanced
Console Setup
Automatic Swath Control
Multiple Product
Norac UC5 Interface
Fan Frame - Feed Gate Control
ISOBUS
Intellislope Tilling
Enabled
Off
Enabled
Off
Enabled
Off
Feature: Status
Feature Description:
Unlock
To Next Page
Loading...
