- CAUTION -
Dispose of oil in the filter bowl in accordance with all applicable government
guidelines. DO NOT introduce the oil back into the hydraulic system.
6. Unthread filter bowl “F” from filter head “E”, Figure 2.30.
7. Pour the oil from the filter bowl and dispose of it properly.
8. Wipe the bowl clean with a lint free cloth.
9. Clean the bowl with a solvent recommended by the hydraulic oil manufacturer. Wipe it dry with
a lint free cloth.
10. Wrap the filter element in a rag and pull it straight down to release it from the nipple on the filter
head.
11. Install a new filter element by gently pressing it onto the nipple.
12. Fill half the filter bowl with fresh pre-filtered Mobil DTE 10 EXCEL 32 oil and thread it onto the
filter head hand tight.
13. Close the access doors and secure latch "J", Figure 2.8.
2-22 M-507C
To Next Page
Loading...
