Hardkernnel ODROID-C2 - Page 21

16 ODROID C2 USER MANUAL
What peripherals are available?
The following peripherals are available from the Hardkernel store and
The following peripherals are available from the Hardkernel store
(http://bit.ly/1hD2dIn) and certied distributors:
• Power supply: DC 5V/2A
• HDMI Type A-A 1.4 and 2.0 (4K) cables
• USB-DC Plug Cable 2.5mm
• MicroSD 8GB, 16GB cards (with pre-installed Android/Ubuntu OS)
• eMMC 8GB, 16GB, 32GB, 64GB (black) module (with a pre-installed An-
droid/Ubuntu OS)
• ODROID-VU7 800x480 HDMI touch-sensitive display
• ODROID-VU7+ 1024x600 HDMI touch-sensitive display
• Clear case (black, blue, clear)
• WiFi Modules 0, 3, 4
• USB3.0 to SATA Bridge Board
• USB OTG cable
• USB CAM 720p
• HiFi Shield Plus
• USB Bluetooth Module 2
• USB GPS Module
• Micro-USB to USB cable
• USB IO Board
• Universal Motion Joypad
• USB-UART module kit
• DC Plug Cable Assembly 2.5mm
• ODROID-Show2
• CAT6 Ethernet cable
• GPIO breakout board with C Tinkering kit
• 16x2 character LCD shield
• myAGRS+
• Weather Board 2
• USB Audio adapter
• VuShell (blue, clear)
• Infrared (IR) remote control
• Xprotolab Plain
• UPS3 Backup Battery
• RTC addon module
What are the minimum peripherals to run Ubuntu or Android with
an ODROID-C2?
The following peripherals are not included with the basic ODROID-C2
board, but may be purchased separately from the Hardkernel store, or
from a certied distributor:
Chapter 1