66 ODROID C2 USER MANUAL
ODUINO ONE data captured by application on C2
After it builds, you can launch the freshly built application using
the following commands:
$ cd Linux/
$ ./oduino
The application user-interface should look like the above image.
ODROID-SHOW2
Hardkernel offers an Arduino-compatible 2.2” 240×320 TFT-LCD
display, called ODROID-SHOW2, shown below, that can be used with
the ODROID-C2, a PC, and other Hardkernel boards.
ODROID-SHOW2 annotated image
After attaching the SHOW2 to the ODROID-C2, use the follow-
ing commands to get details on it:
$ lsusb
…
Chapter 4
To Next Page
Loading...