Harmonic ProStream 9100 - Page 19

Chapter 1 ProStream 9100 Overview
© 2016 Harmonic Inc. All rights reserved. 19 ProStream 9100 Release 17.5, Rev A
Back Panel
Each port is bi-directional and can receive and transmit streams simultaneously. The following
table lists the Quad GbE card specifications.
Table 1–13: Quad GbE Card Specifications
Feature Description
Number of Ports Six. Up to four ports can be active simultaneously (two remain idle)
 4xGbE 1 Gbps
 2xGbE 10 Gbps and 2xGbE 1Gbps with copper cables
Max. input bitrate
 4xGbE 1 Gbps
 2xGbE 1 Gbps with SFP transceiver for fiber
 2xGbE 1 Gbps with SFP transceiver for copper cables
 2xGbE 10 Gbps
Input extraction
 SFP+ transceiver for fiber cable only
 SFP transceiver for either fiber of copper cables
Max. output bitrate Up to 1 Gbps
Number of output
sockets
Up to 250 sockets SPTS or MPTS
Input De-jittering
capability
Up to 50 msc point-to-point
Multicast content Content elements are simultaneously routed to multiple output
ports
Null Packet Insertion Constant bitrate output stream with null packet insertion and PCR
correction
IP UDP modes The following IP UDP modes are supported in both input and
output streams:
 IP UDP unicast
 IP UDP multicast (IGMP Ver. 2)
Max. number of input
services
250 per device
Max. number of output
services
250 per device