Chapter 1 ProStream 9100 Overview
© 2016 Harmonic Inc. All rights reserved. 23 ProStream 9100 Release 17.5, Rev A
Back Panel
Dual GbE IOM
GbE cards should be mounted in slot 1 and slot 2 only. Each GbE IOM card has two independent
ports labeled GbE 1 and GbE 2. Both ports are active and work as two independent ports. Each
port is bi-directional and can receive and transmit streams simultaneously. Each GbE port
includes an SFP module receptacle (see SFP Module). The following table lists the GbE card
specifications of both cards.
Table 1–19: Dual GbE Card Specifications
Feature Description
Number of Ports Two independent GbE ports per I
OM card. Each port serves
simultaneously as an input and output port.
Connector Two receptacles for SFP module.
Max. input bitrate Up to 500 Mbps per card.
Number of input sockets Up to 256 sockets SPTS or MPTS for both ports.
Input extraction Extraction of incoming streams is displayed on the management
inter
face.
Max. output bitrate Up to 500 Mbps per card.
Number of output sockets Up to 128 sockets SPTS or MPTS for both ports.
Input de-jittering
c
apability
Up to 50msc point-to-point.
Multicast content Content elements may be simultaneously routed to multiple
outp
ut ports.
Null Packet Insertion Constant bitrate output stream with null packet insertion and PCR
corr
ection.
IP UDP modes The following IP UDP modes are supported in both input and
out
put streams:
IP UDP unicast
IP UDP multicast (IGMP Ver. 2)
Max. number of input
ser
vices
500 per device.
Max. number of output
ser
vices
500 per device.
To Next Page
Loading...
