Harris assuredcommunications X75-RCP - X75-RCP Fuse Rating and Replacement

42 Control Panels for X75 Systems Installation and Operation Manual
Chapter 2: Operation via Front Panel Controls
Example 1
“my preset that has a long name.psf”
(30 characters)
Result: Will not work (will not display)
Example 2
“my preset w24 characters.psf”
(24 characters)
Result: Will work
Example 3
“non-proper ext.txt”
(Extension is.txt)
Result: Will not work (will not display)
Example 4
“test.txt.psf”
(the last four characters are is “.psf”, making the filename valid)
Result: Will work.
The various procedures for formatting, saving, recalling, renaming, and
deleting presets are outlined below.
Formatting an SD Card
New SD cards must be formatted in an X75 before use. Follow this path
to format a card:
1. Insert the card into the slot
2. Press the Memory button.
3. Select SD Card Format, and then press Enter.
4. Click Ye s when prompted.
A confirmation message will appear briefly.
Saving a Preset
To save a preset, follow these steps:
1. Press Memory.
A menu pops up with the following options:
• List Preset
• Save Presets