Control Panels for X75 Systems Installation and Operation Manual 43
Chapter 2: Operation via Front Panel Controls
• SD Card List Presets
• SD Card Save Presets
2. Select Save Presets to save the settings to the X75, or press SD
Card Save Presets to save the settings to the SD card.
A list of ten slots appears in the X75 memory, or up to 1000
filenames appear in the SD card.
When saving to the X75, the slots are named Preset Slot 1, Preset
Slot 2, etc., or simply Empty. When saving to an SD card, the
default filenames are X75Save00, X75Save01, X75Save02, etc., in
addition to an option to create a new Preset.
3. Overwrite an old file, or, in the X75, scroll to the slot where you
wish to save the entry, and then press the Enter button.
4. To save a new preset, scroll to a slot that is empty in the X75, or
scroll to the New Preset option for the SD card, and then press the
Enter button.
To Next Page
Loading...