Hasselblad H3DII - Drive Modes (Single and Continuous)

107
5 Drive
Drive
There are two drive modes: Single and Continuous.
Single and Continuous
In Single mode, a capture is made when the shutter release button
is pressed and the camera is made ready for the next capture. To
make the next capture however, you must rst release the shutter
release button and then press again.
In Continuous mode, the camera automatically makes captures
and makes ready for the next capture in a continuous manner as
long as you maintain pressure on the shutter release. Please note
the speed is dependent on the time taken to save the capture ac-
cording to equipment.
In camera active mode:
1) Press the MENU button on the grip.
2) Turn the front control wheel to Drive
3) Press Enter (ISO/WB button).
4) Turn the front control wheel to Single or Continuous
5) Press Save to store the setting.
2
1
MENU
F
5
ISO / WB
Save
4
3
ISO / WB
Enter
F