41
General
Whichever way you choose to store your images, they should be led in batches for ef-
cient workow.
Organizing your work with batches
Batches help you to organize your shots as you work. ey function exactly as folders on
a computer. Batches have the following properties:
• Whenyoucreateanewbatch,youassignanametoitanditiscreatedasanew
folder.
• Whenyoucopyimagesfromacompact-ashcard,eachbatchissavedasasub-
folder on the destination disk.
• Whendeletingmultipleimages,youareabletorestrictyourdeletecommandso
that it aects just a single batch.
• Whenbrowsingimages,youwillonlyseeimagesfromthecurrentbatch.
• Youcanchangebetweenbatchesbyusingthenavigationcontrolsofthedigital
capture unit front panel.
• Thebatchnamealsoshowsthedateonwhichitwascreated(usingtheYear/
Month/Day convention).
Please note that each new image will be saved in the latest created batch only. You
cannot select any other batch to save a new image in.
Navigating media and batches
e camera always works with a current medium and a current batch. is is the location at
which the camera will save all new shots and the location in which you can browse us-
ing the navigator button on the front panel. ere are two ways of selecting the current
medium and/or batch:
• Usingthezoomandnavigatorbuttonsonthefrontpanel.Thismethodenables
you to select any existing batch and is therefore useful even when only one type
of medium is attached. This method is explained in the procedure below.
• ChooseMAIN MENU > Storage to select a medium. This is only relevant when more
than one medium is attached (e.g., both a compact ash card and an Imagebank).
When you use this function, you will always go to the most recently created batch
from the medium you select. Please see Selecting the Current Storage Medium
for a complete description of this method.
Storage overview–
working with media
and batches
7