Hasselblad H3DII - Custom Options Overview

78
MAIN MENU > SETTINGS >
Custom Options
Selecting an option
Proceed as follows:
1. Press MENU and navigate down to select SETTINGS.
2. Press the  button and navigate down to Custom Options.
3. Press the  button to select the option. Choices are selected
by the
+
or
–
buttons.
• Copy to I-Bank
When copying les to an ImageBank-II, you can choose whether
you want to copy les from the active batch only or all les
from the entire card.
• I-B connection
You can choose whether you want to add les to the last
batch or create a new batch every time the ImageBank-II is
connected.
• Tilt sensor
e tilt sensor sets the viewing orientation of captures when they
appear in Phocus / FlexColor. In order to avoid unintentional
orientation changes when the camera is pointing straight up
or down, for example, the tilt setting can be locked at:
Auto, Lock at 0 degrees, Lock at 90 degrees, Lock at 180 de-
grees and Lock at 270 degrees.
• Menu Ctrl.
is sets whether the front and rear control wheels are active
or inactive when navigating the sensor menu.
• Display
is setting allows you to turn the digital capture unit display
on when half-pressing the shutter release button. ree options
are available:
•DisplayONbyhalf-press
•DisplayOFFbyhalf-press
•Toggledisplaybyhalf-press



1
2
3