Hasselblad H3DII - Settings Check and ISO Adjustment

55
1 2
5 6
3 4
Settings check
ISO, White Balance, Media and Browse settings should be
checked before each session. ey are therefore placed at the top
level of the menu for quick and easy access. ey are also shown
on-screen in most preview modes, so you can easily keep an eye
on them as your work.
Note also that the menu and approval buttons are situated just
outside the bottom-le and bottom-right corners of the screen.
As you work through the various menu entries, the screen shows
a label for each of these buttons. In the text, we therefore give the
generic name for the button and the screen name. For example we
will refer to: the menu (MENU) button, the menu (EXIT) button,
or the approval (OK) button.
Language
As a practical example, a MAIN MENU > SETTINGS > USER
INTERFACE > Language item instruction would involve the fol-
lowing procedure:
1. Making sure you feel condent to return to your choice of
language by navigating in another, press the menu (MENU)
button to open the menu.
2. Use  and  to select the SETTINGS sub-menu.
3. Press  to open the SETTINGS menu.
4. Press  to select the USER INTERFACE sub-menu.
5. Press either the zoom (
–
or
+
) button to choose a new lan-
guage (in this case Spanish).
6. Press the MENU/EXIT button again to close the menu.
ISO
e ISO setting can be made using the ISO/WB button on the
grip or on the digital capture unit. e “natural” sensitivity of the
CCD is ISO 50 for H3DII 39/50 models and 100 ISO for H3DII
31 models, so you will get best results with this setting if the light
conditions allow.
To set the ISO on the grip:
e ISO/WB button provides immediate access to ISO settings.
e front control wheel is used to make the desired changes. e
settings are automatically and simultaneously transferred from the
camera to the digital capture unit. Please note that the changes are
only displayed on the digital capture unit unit when the settings
have been saved.
1) Press the ISO/WB button on the grip.
2) To make an ISO setting, turn the front control wheel to
choose between:
50, 100, 200 and 400 (39 and 50 Mpix models)
50, 100, 200, 400 and 800 (31 Mpix models)
3) Press SAVE (ISO/WB button) to save the setting.
1
ISO/WB
2
F
3
Save
ISO/WB