34
The menu is structured in a manner similar to mobile/cell phones and similar small electronic devices.
Various branches within the tree system are accessed by pressing the navigation button until you reach
the point where a choice has to be made.
The OK (Approve) button or SELECTION (Zoom-in/Zoom-out) buttons are then used to conrm choice.
Both the front and rear control wheels can also be used to navigate the menu. The rear control wheel
navigates up and down the menu list and the front control wheel navigates sideways in the direction of
the menu arrows. The front control wheel also functions in the same as way as the plus and minus but-
ton functions for settings choice.
The need to continue further into the menu is indicated by the arrow symbol beside the menu
item.
Press the ‘right’ arrow symbol on the navigation button to access the next part of the menu.
Simple introductory overview of menu access, navigation and settings choice.
After pressing the MENU button, the main menu list appears. The blue frame highlights where
you are on the menu. Press on the ‘up’ and ‘down’ symbols on the navigation button to move
up and down the list.
You can return to the standard image view by pressing either on the ‘left’ symbol on the navi-
gation button or on the EXIT/MENU button again.
When you reach the nal destination of your choice (this might take several moves), PLUS and
MINUS symbols appear to the right in the frame round the item. You then press the Zoom-in
/Zoom-out /SELECTION buttons to access a loop list of choices.
In the example on the left, 50 is the ISO value shown. By pressing either button the alterna-
tives appear – 100, 200, 400 and then back to 50 again – both on the list as well as on the
upper low to the left (in the case of ISO value).
Pressing the EXIT/MENU button will then confirm the new setting.
In the next example on the left, the name of a new batch is changed by pressing a combina-
tion of the Zoom-in /Zoom-out /SELECTION buttons as well as the navigation button. You
can then conrm your choice with the OK (Approve) button or revert to the previous status by
pressing the EXIT/MENU button. Note that how the MENU button is now described as EXIT
on the screen, and the Instant Approval button is described as the OK button.
See later sections for more comprehensive information.
The FLASH button
on the grip also acts
as a menu EXIT but-
ton and the ISO /WB
button acts as an OK
button.
The rear control wheel navigates up and
down the menu list and the front control
wheel navigates sideways in the direction
of the menu arrows.
The front control wheel also functions in
the same as way as the PLUS and MINUS
button functions for settings choice.
=
=
To Next Page
Loading...
