Hasselblad H3DII - Browse Filter Options

59
1
2 3

There is also a one-button shortcut
for changing the browse lter.
To use it, press and hold (do not
click!) the Instant Approval button
until the approval status colour
appears. Browsing will then only
display the images with that clas-
sication.
 Browse lter
shortcut !
Browse
e browse lter complements the instant-approval system by
enabling you to browse through images according to their approval
status. You have the following choices:
All: • browses all of the images in the current batch, regardless
of their approval status. is is the default.
Red: • browses only red-status images from the current batch.
ese are images that you have marked for likely deletion. You
might browse these images to make sure you have not eliminated
any usable images and/or to nd images that you can delete to
make room for new shots.
Green: • browses only green-status images from the current
batch. ese are either new shots that did not trigger an ex-
posure warning or shots that you manually assigned to green
aer overriding an exposure warning.
Green & Yellow: • browses green and yellow-status images, but
does not show red-status images. ese are probably images
that you have either decided to keep or not yet checked for
approval status.
•
For more information about using the instant-approval system,
please see Using Instant Approval Architecture.
To set the browse lter using the menus:
1. Choose MAIN MENU > Browse. The current setting is dis-
played here.
2. Use the zoom (
–
or
+
) button to step through the lter
options (described above) until you have selected the lter
you wish to use.
3. Either move on to another setting by using the navigator but-
ton or press the menu button to exit the menu system and
keep your setting.
e appearance of the ‘Empty Browse Filter’ message signies that
there are no images with that particular approval status.