99
options available
CUSTOM OPTIONS
1 2
3 4
5 6
7 8
4 Settings / 4.1 Custom Options
4 Settings
From the Settings screen you can access three main sub-settings:
Custom options, Image Info and System status by turning the
front control wheel. From each of these three sub-settings you can access
further screens. Custom options has 30 screens, Image info has two
more screens each with more choices and System status has two more
screens. Look at the main menu chart to get an idea of where all the op-
tions are on the menu tree
4.1 Custom options
1) Press the MENU button on the grip.
2) Turn the front control wheel until Settings appears.
3) Press the ISO/WB (Enter) button on the grip.
4) Turn the front control wheel to access 4.1 Custom options.
5) Press the ISO/WB (Enter) button to access the more than 25
choices available.
6) Turn the front control wheel to the desired Option.
7) Turn the rear control wheel to the desired Setting.
8) Press Save
As a shortcut to the Custom Option level, press MENU and then
the USER button. After making any changes, press the shutter
release button to save the new setting.
In the following list, the options marked in red are the default settings. So,
in the case of the User button, for example, as None is the default there
will be no reaction from the camera until you make a specic choice and
save it.
If you want to reset the camera to the default setting for all options, press
the ON.OFF button quickly to enter Profiles, select Standard and then
press Load.
MENU
To Next Page
Loading...
Need help?
General
