Hasselblad H3DII - Initial General Settings and Preparation

36
1 2
3 4
5 6
The initial general setting is language choice. This choice is retained but
can be changed at any time. You can choose between:
ENGLISH
GERMAN
FRENCH
ITALIAN
SPANISH
JAPANESE
CHINESE
Before each shoot, just as in analogue photography, an ISO setting should
be made, though in the digital world it matches the job in hand and cir-
cumstances as opposed to the sensitivity of the lm chosen. A white bal-
ance setting should also be made. This is for your convenience regarding
the appearance of the image on the display though; it will not aect the
raw le.
ISO and White Balance are immediately accessible by pressing the ISO/WB
button on the grip. They are also shown on-screen in most preview modes,
so you can easily keep an eye on them as you work.
The description below is a general illustration of how settings are
changed. See later section in this manual for details regarding ISO and
White Balance.
Setting the menu language
Proceed as follows:
1. Press the MENU/EXIT (
) button to open the menu.
2. Press the NAVIGATOR button ( and ) to select the
SETTINGS sub-menu.
3. Press the NAVIGATOR button () to open the SETTINGS
menu.
4. Press the NAVIGATOR button () to select the USER
INTERFACE sub-menu.
5. Press either ZOOM button (
+
or
–
) to choose a new lan-
guage (in this case, Spanish).
6. Press the MENU/EXIT (
) button again to close the menu.
Initial General Settings
and Preparation
6