67
To copy les:
With an ImageBank-II attached to the camera by a FireWire cable
and turned on:
1. Press MENU and navigate down to select STORAGE.
2. Press the button and navigate down to COPY.
3. Press the button to reach the conrmation dialogue.
To conrm, press the OK button. (To cancel, press the EXIT
button.)
Conrmation will make a copy of all batches and les and
store them on the ImageBank-II in a newly created folder
called ‘CARD0001’ (for example). If you connect the camera
to the ImageBank-ll again, a new folder can be automati-
cally created with the name ‘CARD0002’ (for example) and so
on, depending on setting (see Menu > Settings > Custom
Options).
4. The copying dialogue now appears to inform you of progress.
Press STOP if you want to cancel the procedure.
2
3
1
4
Navigating the STORAGE
settings to COPY IMAGES.
To Next Page
Loading...
