Hasselblad H5D - ISO Setting on Sensor Unit; White Balance Setting on Sensor Unit - Presets:; White Balance Setting on Sensor Unit - Numerical Value Setting:

58
1. Press MENU.
2. Navigate to ISO (use the Rear scroll wheel or the Navigator).
3. Press the True Focus ( ) or AE-L ( ) buttons – (or the ZOOM button) – to step through the available settings.
4. Save the chosen selection by pressing EXIT (MENU button).

WHITE BALANCE SETTING ON SENSOR UNIT
– PRESETS:
SENSOR UNIT MENU > WHITE BALANCE
1. Press MENU.
2. Navigate to White Balance (use the Rear scroll wheel or the Navigator).
3. Press the True Focus ( ) or AE-L ( ) buttons – (or the ZOOM button) – to step through the available settings.
4. Save the chosen selection by pressing EXIT (MENU button).

WHITE BALANCE SETTING ON SENSOR UNIT
 NUMERICAL VALUE SETTING:
SENSOR UNIT MENU > WHITE BALANCE
Manual setting allows a specic numeral setting.
1. Press MENU.
2. Navigate to White Balance (use the Rear scroll wheel or the Navigator).
3. Press the True Focus ( ) or AE-L ( ) buttons – (or the ZOOM button) – to
step through until you reach Manual.
4. Use the Front scroll wheel or the Navigator to access the dialogue.
5. Press the True Focus ( ) or AE-L ( ) buttons to select the desired numeri-
cal setting.
6. Save the chosen selection by pressing EXIT (MENU button).

ISO SETTING ON SENSOR UNIT
SENSOR UNIT MENU > ISO
ISO and White Balance can be set either on the sensor unit, the grip or, when tethered, via Phocus.
On the sensor unit, the settings are automatically and simultaneously transferred from the sensor unit to the grip. Likewise
all changes on the grip are automatically transferred to the sensor unit display. Please note that the changes are only dis-
played on the sensor unit when the settings have been saved.
White Bal. Setting Setting description
Daylight
For general outdoor use in direct sunlight.
Cloudy
For general outdoor use in cloudy weather.
Shade
For general outdoor use in shady locations out of direct sunlight.
Flash
For general indoor use when using a normal ash/strobe system.
Fluorescent
For use when using uorescent lighting (strip lights).
Tungsten
For use when shooting indoors under standard tungsten/B lamps.
Manual
For a manual setting
There are six ‘White Balance’
presets plus a Manual setting
to choose from.
Tip
Assign a customizable button
for immediate manual white
balance adjustment in mixed
or rapidly changing lighting
situations.
Tip
Include a predetermined ISO
and /or WB setting in a cus-
tom prole for specic cases.
Navigator Display
Zoom
Menu