63
BUTTON P1 & P2, DISPLAY OFF, SLEEP, POWER OFF, IMAGE ORIENTATION, SHOW PREVIEW
Custom Options allows the setting of various options, as listed here. The setting procedure is the same for these features:
1. Press MENU.
2. Navigate to Settings (use the Rear scroll wheel or the Navigator).
3. Navigate to Custom Options (use the Rear scroll wheel or the Navigator).
4. Navigate to required item (use the Rear scroll wheel or the Navigator).
5. Press the True Focus ( ) or AE-L (
) buttons – (or the ZOOM
button) – to step through options.
6. Save the chosen selection by pressing EXIT (MENU button).
• P1 and P2 Button Function
SENSOR UNIT MENU > SETTINGS > CUSTOM OPTIONS > P1 / P2
Allows you to assign specic functions to the two buttons. These buttons act in
the same manner as the four reassignable buttons on the grip. The buttons can
also be assigned in the Camera Conguration tool in Phocus.
OPTIONS: Browse Mode, Mark Overexposure, Delete Image, Format Card,
Info Screen, Spirit Level, Focus Conrm, Live View (50c/50cWiFi/50cMS/200cMS
models only)
SETTINGS > CUSTOM OPTIONS
• Display Off
SENSOR UNIT MENU > SETTINGS > CUSTOM OPTIONS > DISPLAY OFF
Sets the amount of elapsed time before the display is turned o. See ‘Power
Modes’ section in this manual for further details.
OPTIONS: 10 sec, 20 sec, 30sec, 60 sec.
• Sleep
SENSOR UNIT MENU > SETTINGS > CUSTOM OPTIONS > SLEEP
Sets the amount of elapsed time before the camera enters ‘Sleep’ mode. See
‘Power Modes’ section in this manual for further details.
OPTIONS: 5 min, 10 min, Never
Navigator Display
Zoom
Menu
• Power Off:
SENSOR UNIT MENU > SETTINGS > CUSTOM OPTIONS > POWER OFF
Sets the amount of elapsed time before the camera enters complete power o
mode. See ‘Power Modes’ section in this manual for further details.
OPTIONS: 30 min, 60 min, Never
To Next Page
Loading...
Need help?
General
