60
STORAGE
Note
You will always be
asked to conrm each
delete operation.
FORMAT
The camera is only able to read and write to storage media that have been format-
ted. New cards sometimes have no formatting, or you might want to convert a card
that is currently using a format that the camera cannot read.
There are two ways to format cards. The quickest way is to use the Format button
on the grip but if you prefer, you can also use the menu on the sensor unit.
See further information about formatting cards in the ‘General’ section of this
manual.
FORMAT ON SENSOR UNIT
SENSOR UNIT MENU > STORAGE > FORMAT
1. Press MENU.
2. Navigate to Storage (use the Rear scroll wheel or the Navigator).
3. Navigate to Format (use the Rear scroll wheel or the Navigator).
4. Navigate to Format dialogue (use the Rear scroll wheel or the Navigator).
5. Press OK (Display button) to conrm.
Navigator Display
Zoom
Menu
DELETE
SENSOR UNIT MENU > STORAGE > DELETE
Delete allows you to make single or multiple deletes of captures.
1. Browse to image you want to delete
2. Press MENU.
3. Navigate to Storage (use the Rear scroll wheel or the Navigator).
4. Navigate to Delete (use the Rear scroll wheel or the Navigator).
5. Navigate to Delete dialogue use the Front scroll wheel or the Navigator).
6. Press the True Focus ( ) or AE-L (
) buttons – (or the ZOOM button) to
step through options.
7. Press OK (Display button) to conrm.
CREATE NEW FOLDER
SENSOR UNIT MENU > STORAGE > FORMAT
See section in “Previews & Browsing” chapter.
SETTINGS > STORAGE
Storage includes three entries: Create new folder, Delete and Format.
To Next Page
Loading...
Need help?
General
