Hasselblad H5D - Drive; Single and Continuous Setting

86

DRIVE
There are two drive modes: Single and Continuous. In Single
mode, a capture is made when the shutter release button is
pressed and the camera is made ready for the next capture.
To make the next capture however, you must rst release the
shutter release button and then press again.
SINGLE AND CONTINUOUS SETTING
In camera active mode:
1) Press MENU on grip.
2) Turn the Front scroll wheel until Drive appears.
3) Press ENTER.
4) Turn the Front scroll wheel to Single or Continuous.
5) Press SAVE.
In Continuous mode, the camera automatically makes cap-
tures and makes ready for the next capture in a continuous
manner as long as you maintain pressure on the shutter re-
lease. Please note the speed is dependent on the time taken
to save the capture according to equipment.
MENU
Front scroll
wheel
ENTER
or
SAVE