79
Display o time 1
• 10s • 20s • 30s • 60s
Determines the amount of time
elapsing before the display auto-
matically turns o. Set on the sen-
sor unit> Menu > Settings > Custom
Options > Display O.
EV increment 2
• 1/2 Step • 1 Step • 1/3 Step
Determines the amount of EV
change applied (per click of either
the front or rear scroll wheels) to ei-
ther aperture or shutter speed.
Exp adjust increment 3
• 1/3 Step • 1 Step • 1/2 Step
Determines the amount of EV
change applied (per click of the
rear scroll wheels) when making
xed exposure adjustment set-
tings.
True Focus button function 4
• True Focus
but can be reassigned to:
AF Drive • AE-lock • Self Timer •
Bracketing • Mirror up • Stop Down
• B mode • T mode • Flash Measure
• Interval timer • Cycle LM mode •
Expose • Display O • Histogram •
Delete • Grey bal ex • Spirit Level •
Rear Info Screen • None
AE-Lock button function 5
• AE-lock
but can be reassigned to:
AF Drive • Self Timer • Bracketing •
Mirror up • Stop Down • B mode •
T mode • Flash Measure • Interval
timer • Cycle LM mode • Expose •
Display O • Histogram • Delete •
Grey bal ex • Spirit Level • Rear Info
Screen • None
CUSTOM OPTIONS (ON GRIP)
The following is a description of all the Custom Options ac-
cessible through the grip display. They are accessed by Menu
> Settings > Custom Options. The words and gures in red
signify the default setting for that option.
Stop down function 6
• Stop Down
but can be reassigned to:
AF Drive • AE-lock • Self Timer •
Bracketing • Mirror up • B mode •
T mode • Flash Measure • Interval
timer • Cycle LM mode • Expose •
Display O • Histogram • Focus conf
• Delete • Grey bal ex • Spirit Level •
Rear Info Screen • None
M.UP button function 7
• Mirror up
but can be reassigned to:
AF Drive • AE-lock • Self Timer •
Bracketing • Stop Down • B mode •
T mode • Flash Measure • Interval
timer • Cycle LM mode • Expose •
Display O • Histogram • Focus conf
• Delete • Grey bal ex • Spirit Level •
Rear Info Screen • None
Scroll wheel direction 8
• Clockwise • Counter clockwise
Determines the eect the direction
of the controls wheels have on a
setting.
For example, by moving the front
scroll wheel to the left you can alter
the aperture setting from f/8 to f/6.8
to f/5.6 and so on. By changing the
wheel direction setting however,
the same action of turning the wheel
to the left would then produce the
opposite eect, that is, the aperture
settings would change from f/ 8 to
f/ 9.5 to f/ 11, and so on.
Flash ready exposure lock 9
• Yes • No
Allows you to make a capture be-
fore the ash is fully charged. For
use with integral ash unit or other
TTL compatible ash units con-
nected to the hot-shoe. Not valid
for ash units connected by the PC
connector.
Yes blocks the shutter until ash is
ready.
No allows shutter release before ash
is ready.
To Next Page
Loading...
Need help?
General
