Hawk Gladiator - Part Numbering; Remote Amplifier; Remote Transducer; Junction Box

Part Numbering
Gladiator Acoustic Switch Series
30
AWRT-JB-01 HAWK multi purpose junction box
for dual transducer applications
AWRT-JB-06 HAWK multi purpose junction box
for dual transducer applications with
6m cable
Junction BoxRemote Amplier
GSA Remote Gladiator System Amplifier
Housing
S Standard polycarbonate electronics housing
Power Supply
B 12-30VDC
C 36-60VDC
U 12-30VDC and 90-260VAC
Output Options
S Switch. 1 level relay, 1 failsafe relay,
with Modbus
Other Options
A22 ATEX Grp II Cat 3 GD
T85°C IP67 Tamb -40°C to 70°C
GSA S U S
Extra Cable
CA-TXCC-R-C15 15m (49ft 2.5")
CA-TXCC-R-C30 30m (94ft 5.1")
CA-TXCC-R-C50 50m (164ft 0.5")
CA-TXCC-R-C100 100m (328ft 1")
FA4A-4 HAWK 4” ANSI flange with decoupled
connection flange for acoustic switch
sleeve
FA4A-4-ASC HAWK 4” ANSI flange with decoupled
connection flange for spray cleaner sleeve
Mounting Flange
Hazardous area approvals and
intrinsically safe options available,
contact your local distributor or head
sales office for further information.
AWRT Acoustic Wave Remote Transducer
15 15kHz for applications with heavy duty self cleaning requirements
Transducer Diaphragm / Sleeve Material
T Teflon / UHMW (applications suitable for Teflon (no sensor face wear))
Y Titanium face / UHMW (applications with possible sensor face wear eg crushers)
Transducer Housing Material
4 Polypropylene
Thread Standards for End cap
X Not Available
Mounting Thread
X 15kHz - GAWSLV-3-X sleeve mounted (3.5” BSP thread to suit FA4A-4 flange)
Approval Standard
X Not Required
A22 ATEX Grp II Cat 3 GD T85°C IP67 Tamb -40°C to 70°C
Connection
C IP68 Sealed unit with cable
Cable Length
15 15m cable (standard)
30 30m cable
Accessories
X UHMW sleeve
Software Options
AS Gladiator Acoustic Switch
AWRT 15 Y 4 X X X C 15 X AS
Remote Transducer