HDL M/R4.16.1 - User Manual

HDL KNX / EIB Switch Actuators
_____________________________________________________________________________________
Guangzhou Hedong Electronic Co.,Ltd (HDL)
www.hdlchina.com 1/58

Summary

Hardware

2.1 Technical Data

Provides detailed electrical and physical specifications, including power supply, nominal values, and switching currents.

2.3 Wiring Diagram

Presents the electrical wiring diagrams for connecting the switch actuator to the KNX/EIB bus and load circuits.

Software

3.1 Database Functions Overview

Provides an overview of the functions and parameters supported by the switch actuators across different models.

3.2 Object;Association;Group Address Define

3.3 Function Parameter General

3.4 Function Parameter Channel N

3.5 Channel Mode Switch Actuator

Sets up the channel to operate as a switch actuator, defining connection types and response behaviors.

3.5.1 Channel Function Enable and Parameters

3.5.3 Channel Function time

Details the configuration for time-related functions, including flashing and staircase lighting.

3.5.4 Channel Function scene

Enables and configures scene control functionality, allowing up to 64 scenes per channel.

3.5.5.1 Channel Function “1 byte threshold”

Sets up 1-byte threshold inputs to control switch state based on received values.

3.5.6 Channel Function “blinds”

3.5.7 Channel Function logic

3.5.8 Channel “Heating Actuator

Communication Objects Description

4.4 Advanced Control Objects

HDL M/R4.16.1 Specifications