HDL KNX / EIB Switch Actuators
_____________________________________________________________________________________
Guangzhou Hedong Electronic Co.,Ltd (HDL)
www.hdlchina.com 45/58
4.2.7 Objects “Staircase light”
NO. Object name Function Flags Data type
17
Output N Staircase light C W U EIS1
DPT 1.001
1bit
This communication object is used for start or stop staircase light
Table 11 Staircase light
4.2.8 Objects“Change staircase lighting time”
NO. Object name Function Flags Data type
18
Output N Change staircase
lighting time
C W U EIS10
DPT 7.005
2byte
This communication object is used to modify the staircase lighting running time. allow
modify staircase lighting time via bus by setting this function activity.
Table 12 Change staircase light running time(2byte)
4.2.9 Objects “Alarm staircase lighting”
NO. Object name Function Flags Data type
19
Output N Alarm staircase
lighting
C R T EIS1
DPT 1.005
1bit
This communication object is used to alarm the staircase lighting. If the function is
actived, the staircase lighting start or stop ,the communication object will alarm via bus.
channel “N” is ON alarm “1”, Otherwise alarm “0’.
Table 13 Alarm staircase light
To Next Page
Loading...
Need help?
General