HDL M/R4.16.1 - 3.5 Channel Mode Switch Actuator

HDL KNX / EIB Switch Actuators
_____________________________________________________________________________________
Guangzhou Hedong Electronic Co.,Ltd (HDL)
www.hdlchina.com 16/58
3.5 Channel mode “Switch Actuator”
Fig3: Switch Actuator windows
More functions setup in this mode, the following section will
description detailed of the Switch Actuator mode.
---Normally connected type
This parameter is the choice of the type of access load
Options: Normally Closed:
Normally Opened
Normally Closed: Access of the load type normally OFF state is
closed.
Normally Opened: Access of the load type normally OFF state is
opened.
---Response of switch state ON/OFF
This parameter is the choice of the switching state feedback
Options: No response
Always response