HDL KNX / EIB Switch Actuators
_____________________________________________________________________________________
Guangzhou Hedong Electronic Co.,Ltd (HDL)
www.hdlchina.com 15/58
Options: 0…65535s
The parameter set to nonzero, Device will send a telegram data
cyclically when time out. Send the value alternately between 0 and 1.
3.4 Function parameter Channel “N”
Fig2: “Channel N” parameter(N=A,B,C...) windows
In the parameter windows of the “Channel N”,
can setup some
common functions.
Through functional selection and download the
database to the device,
and device will work in accordance with the
selected function.
---Channel “N(N=A,B,C…)” work mode:
The function of the output “N” work mode can be selected with three
parameter.
Options: Switch Actuator
Heating Actuator
Inactivated
If select “Inactivated”, The channel “N” function will be invalid,
otherwise work in the other two modes.
To Next Page
Loading...
Need help?
General