HDL M/R4.16.1 User Manual

HDL KNX / EIB Switch Actuators
_____________________________________________________________________________________
Guangzhou Hedong Electronic Co.,Ltd (HDL)
www.hdlchina.com 43/58
4.2.1 Objects“Respone”
NO. Object name Function Flags Data type
11
Output N No response
/Always response
/Only after change
C R T EIS1
DPT 1.001
1bit
This communication object used response the channel N status, If channel status is
ON,then the response status value is “1”, Otherwise the status value is “0”
Table 5 Response
4.2.2 Objects “R/W statistics for time”
NO. Object name Function Flags Data type
12
Output N Read/write
statistics for time
C R W T U EIS10
DPT 7.007
2bytes
This communication object is used for statistics ON time of the channel “N”. it can be
read/wrote via bus by setting this function activity
Table 6 Read/write statistics ON time (2byte)

HDL M/R4.16.1 Specifications

General

Brand	HDL
Model	M/R4.16.1
Category	Controller
Language	English