HDL KNX / EIB Switch Actuators
_____________________________________________________________________________________
Guangzhou Hedong Electronic Co.,Ltd (HDL)
www.hdlchina.com 47/58
4.2.11 Objects “Threshold”
NO. Object name Function Flags Data type
21
Output N Threshold input C W U EIS14
DPT 5.004 1byte
EIS10
DPT 7.001 2bytes
If this communication object is actived , the threshold input value from bus compare with
threshold 1 and threshold 2, and calculate the status of switch according to the setting of
database.
22
Output N Change threshold
1
C W U EIS14
DPT 5.004 1byte
EIS10
DPT 7.001 2bytes
Change threshold1 value via bus.
23
Output N Change threshold
2
C W U EIS14
DPT 5.004 1byte
EIS10
DPT 7.001 2bytes
Change threshold2 value via bus.
Table 15 Threshold
4.2.12 Objects “Blinds”
NO. Object name Function Flags Data type
24
Output N Moving for
Blinds(0-UP,1-DOWN)
C W U EIS1
DPT 1.008
1bit
This communication object control blinds move UP/DOWN. The blinds move UP/DOWN
run or stop by the value of receiving telegram from the bus or stop until timeout .
25
Output N Adjust/Stop for Blinds C W U EIS1
DPT 1.007
1bit
This communication object control blinds adjust or stop. If the blinds moving,Then
receiving ‘1’ or ‘0’ for stop moving.Otherwise adjust the blinds.
Table 16 Blinds
To Next Page
Loading...
Need help?
General