EasyManua.ls Logo

HDL M/R4.16.1 - 3.5.8 Channel “Heating Actuator

HDL M/R4.16.1
58 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HDL KNX / EIB Switch Actuators
_____________________________________________________________________________________
Guangzhou Hedong Electronic Co.,Ltd (HDL)
www.hdlchina.com 38/58
3.5.8 Channel “Heating Actuator”
Fig14: Heating Actuator windows
The channel will work at PWM mode. The PWM control by 1bit or
1byte.
--- Normally connected type
Options: Normally Closed
Normally opened
Normally Closed: Normally close heating.
Normally opened: Normally open heating.
---The switch state on bus voltage failure:
It has three option can be set by user
Options: Unchange
ON