HDL KNX / EIB Switch Actuators
_____________________________________________________________________________________
Guangzhou Hedong Electronic Co.,Ltd (HDL)
www.hdlchina.com 39/58
OFF
Unchange: The channel switch position unchanged after bus voltage
failure
ON: The channel position will switch ON after bus voltage
failure
OFF: The channel position will switch OFF after bus voltage
failure
---The operation of switch after bus voltage recovery
It has four option for bus voltage recovery also as below
Options: Unchange
Recovery
ON
OFF
Unchange: The channel switch position unchanged after bus voltage
recovery.
Recovery: After bus voltage recovery, the channel switch position will
come back to the state of the power-down previous.
ON: The channel switch position will be set to ON after bus voltage
recovery.
OFF: The channel switch position will be set to OFF after bus voltage
recovery.
---Save statistic for ON switching ‘counter(4bytes)’
Statistical channel switch ON counter.
Options:
Disable
Enable
Disable: Disable Statistics ON counter
Enable: Enable Statistics ON counter
>>:->Alarm for counter out
Options:
No
Yes
No: Not alarm
Yes: Alarm
>>:--Alarm when counter our(10..10000000)
This parameter set the ON alarm overflow time.counter
Options: 10..10000000
>>:--Alarm telegram interval when counter out(1..255s)
To Next Page
Loading...