HDL M/R4.16.1 - Page 17

HDL KNX / EIB Switch Actuators
_____________________________________________________________________________________
Guangzhou Hedong Electronic Co.,Ltd (HDL)
www.hdlchina.com 17/58
Only after change
No response: no response switch state.
Always response: always response switching state when receive the
channel telegram data.
Only after change: only response switching state when channel state
changed.
---Save statistic for ON switching ‘time(hour-2bytes)’
Statistics per channel ON time , useful for management and
monitoring
.
Options: Disable
Enable
Disable: Disable Statistics ON time
Enable: Enable Statistics ON time
>>:->Alarm for time out
Options: No
Yes
No: Not alarm
Yes: Alarm
>>:--Alarm when time out(1..65535h)
This parameter set the ON time alarm overflow time.
Options: 1..65535h
>>:--Alarm telegram interval when time out(1..255s)
This parameter is set to ON time overflow alarm interval.
Options: 1..255s
>>:--Alarm telegram number(1..255,0-unlimited)
This parameter set the ON time overflow alarm of the number.
Options:0-unlimited
1..255
---Save statistic for ON switching ‘counter(4bytes)’
Statistical channel switch ON counter.
Options: Disable
Enable
Disable: Disable Statistics ON counter
Enable: Enable Statistics ON counter
>>:->Alarm for counter out