HDL KNX / EIB Switch Actuators
_____________________________________________________________________________________
Guangzhou Hedong Electronic Co.,Ltd (HDL)
www.hdlchina.com 24/58
Control staircase light with three mode.
Options:Start with ‘1’, Stop with ‘0’
Start with ‘1’, Invalid with ‘0’
Start with ‘1’/‘0’ , Can't Stop
Start with ‘1’, Stop with ‘0’: when received telegram value is ‘1’,The
staircase light start and switching ON.when received telegram value
is ‘0’ or time out,switching OFF and stop staircase light.
Start with ‘1’, Invalid with ‘0’: when received telegram value is
‘1’,The staircase light start and switching ON.Invalid with telegram
value ‘0’.
Start with ‘1’/‘0’ , Can't Stop: when received telegram value is
‘1’or’0’,The staircase light start and switching ON
---Change staircase lighting time via bus
Options: NO
YES
NO: Can’t change staircase lighting delay off time via bus , only
can be set by ets.
YES:Allow change staircase lighting delay off time via bus by user.
---Alarm staircase lighting to bus
Options: NO
YES
NO: Not Alarm.
YES: Alarm staircase light.
---Time for off:(0...255 Min)
Duration minutes of the staircase lighting delay off time.
---Time for off:(0...59 Sec)
Duration seconds of the staircase lighting delay off time.
---Warning staircase lighting(ON->OFF->ON)
Options: NO
YES
NO: Not allow alarm
YES: Allow alarm.
To Next Page
Loading...
Need help?
General