350 9 Programming: Subprograms and Program Section Repeats
9.6 Programming Examples
8 LBL 1
Set label for program section repeat
9 L IZ-4 R0 F MAX
Infeed depth in incremental values (in the open)
10 APPR CT X+2 Y+30 CCA90 R+5 RL F250
Approach contour
11 FC DR- R18 CLSD+ CCX+20 CCY+30
Contour
12 FLT
13 FCT DR- R15 CCX+50 CCY+75
14 FLT
15 FCT DR- R15 CCX+75 CCY+20
16 FLT
17 FCT DR- R18 CLSD- CCX+20 CCY+30
18 DEP CT CCA90 R+5 F1000
Depart contour
19 L X-20 Y+0 R0 F MAX
Retract tool
20 CALL LBL 1 REP 4/4
Return jump to LBL 1; section is repeated a total of 4 times.
21 L Z+250 R0 F MAX M2
Retract in the tool axis, end program
22 END PGM PGMWDH MM
To Next Page
Loading...
