HERO MAESTRO EDGE PROGRAMMED FI - Pre-Ride Inspection and Security; Pre-Ride Inspection Checklist; Anti-Theft Tips and Vehicle Security

39
Removal
(e) Floor side cover
•
Remove the three screws (1) from right
floor side cover (2).
•
Open the pillion footrest (page 32).
Right floor side cover
1
(1) Screws (2) Right floor side cover
2
•
To dislodge the tabs (3), slide the floor side
covers to the rear side.
(3) Tabs
• Remove the right floor side cover.
Installation
Installation is in the reverse order of removal.
Left floor side cover
Removal
• Open the pillion footrest (page 32).
• Remove the three screws (1) from left floor
side cover (2).
1
(1) Screws (2) Left floor side cover
2
•
To dislodge the tabs (3), slide the floor side
covers to the rear side.
(3) Tabs
•
Remove the left floor side cover.
3
3