57
CAUTION
!!
•
Do not blow compressed air.
•
Do not wash using any solvent.
WASH IN KEROSENE
SAE 90 Grade
SQUEEZE
TO SPREAD OIL
The pre foam element should be serviced at
regular intervals . Service more (page 53)
frequently when riding in unusually wet or
dusty areas.
•
Wash the pre foam element in kerosene.
•
Spread 5ml (4 to 5 drops) of SAE 90
grade at different locations on pre foam
element.
Pre oam f element
Cleaning
•
Replace air cleaner element once in every
15000 km or early replacement may be
required when riding in dusty areas.
•
element At 12000 km inspect if air cleaner
(viscous type) is choked. If found choked,
replace the air cleaner element to keep the
engine healthy.
•
Replace pre foam element or viscous element
at any point of time, if found damage.
NOTE
CAUTION
!!
Do not wring the filter element with both
hands.
•
Install the pre foam element.
•
Install the air cleaner cover.
Installation
•
Clean the air cleaner sub assembly case (4)
using a shop towel.
•
Install the air cleaner element holder
component (new, in case of replacement).
Refer to the safety precautions (page 52).
•
Remove the drain tube (1) from the air
cleaner assembly (2) and drain deposits in
to a suitable container.
•
Reinstall the drain tube.
AIR CLEANER DRAIN TUBE CLEANING
•
body cover (page 37)Install the .
•
Squeeze it in a manner so that oil will spread
on complete surface of pre foam element.
To Next Page
Loading...
