HERO XTREME 200S PROGRAMMED FI - Tire Tread Wear and Repair; Tread Wear Indicator Identification; Unidirectional Tire Rotation Guidance; Tire Repair Guidelines and Limitations

•
Excessive tread wear.
65
Tread wear
Replace tyres immediately when the wear
indicator (1) appears on the tyre. The tread
limits are:
•
Carefully inspect the tyres for any damage,
if the vehicle hits a pothole or hard object.
Front: 0.8 mm Rear: 1.0 mm
MINIMUM TREAD DEPTH:
Check the tread wear indicator for tyre wear.
(1) Tread wear indicator (2) Arrow mark
TWI
1
2
Repairing a puncture or removing a wheel
requires special tools and technical expertise.
If a tyre is punctured or damaged, it is advised
to visit nearest tyre manufacture, Hero
MotoCorp authorised dealer/workshop or the
tyre repair shop who has expertise in
repairing methods of tubeless tyre.
A tyre that is repaired either temporarily or
permanently, will have lower speed and
performance limits than a new tyre. After an
emergency repair, always have the tyre
inspected/replaced at our authorised dealer
and replace the tyre if suggested.
Unidirectional tyres
Whenever the tyre is removed and put back in
case of puncture, ensure the arrow mark (2)
on the tyre is in the same direction as that of
forward rotation of wheel.
Tyre repair