HEXING HXE110 - 5.1 Active Energy Measurement; 5.2 Reactive Energy Measurement; 5.3 Apparent Energy Measurement; 5.4 Instantaneous Measurement

User manual for single-phase meter
6
5 Measurement
5.1 Active energy Measurement
The Energy accumulate mode is +A=A
+
;-A=A
-
The support Energy registers as below:
 Import active energy Total & per tariff
 Export active energy Total & per tariff
 Combined active energy Total & per tariff
 Net active energy Total & per tariff
5.2 Reactive energy Measurement
The Energy accumulate mode is +R=RI+RII;-R=RIII+RIV
The support Energy registers as below:
 Import reactive energy Total & per tariff
 Export reactive energy Total & per tariff
 Reactive energy Total & per tariff in QI & QII & QIII & QIV
5.3 Apparent energy Measurement
The support Energy registers as below:
 Import apparent energy Total &per tariff
 Export apparent energy Total &per tariff
5.4 Instantaneous Measurement
The support instantaneous value as below:
 Voltage
 Current
 Active power
 Reactive power
 Apparent power
 V&I Phase Angles
 Power factor
 Frequency